AUDI UNVEILS NEW HIGH EFFICIENCY TFSI PETROL ENGINE
Wraps removed from new 2.0-litre TFSI four-cylinder using innovative combustion process at the Vienna Motor Symposium
New 2.0 TFSI four-cylinder engine with innovative combustion method
Top figures: 190PS, 320 Nm (236.0 lb-ft), in excess of 56mpg
To be installed in the new Audi A4 by the end of 2015
Prof. Dr. Ulrich Hackenberg:“A prime example of the Audi rightsizing strategy”
Audi is relentlessly pursuing an ever better balance between performance and economy across its engine range, and the latest evidence of this is a new 190PS 2.0-litre TFSI notable as the most efficient petrol-powered unit in its class. The newcomer exemplifies the brand’s Vorsprung durch Technik philosophy by way of an innovative new combustion method, and will be entered into service in the all-new A4 later in 2015.
Over ten years ago, Audi launched its first series production engine featuring a ground-breaking combination of turbocharging and direct injection. This made the brand with the four rings the trendsetter in downsizing and downspeeding.
“We’re now taking a crucial step further with rightsizing,” said Prof. Dr. Ulrich Hackenberg, Member of the Board of Management for Technical Development at AUDI AG. The reduction in displacement and engine speed can be optimally effective only if reasonably related to the vehicle class and the customers’ everyday use, explains the Technical Director. “Rightsizing thus involves the optimal interplay of vehicle class, displacement, output, torque and efficiency characteristics under everyday conditions. Our new 2.0 TFSI is a prime example of Vorsprung durch Technik.”
The four-cylinder engine draws 190PS of power and 320 Nm (236.0 lb-ft) of torque from a displacement of 1,984 cc. Because the high torque is applied in a wide speed range from 1,450 to 4,400 rpm, every customer will benefit from the unit’s strong and constantly accessible pulling power.
The engine also outruns its predecessor and its direct competitors in terms of fuel efficiency, with a ground-breaking maximum of in excess of 56mpg possible according to the NEDC cycle test.
Technology in detail:
The breakthrough of the 2.0 TFSI lies in a new combustion method. At its core its principle is comparable to the Miller cycle. Audi engineers have further developed that method in crucial ways, however. The increase in efficiency is based on the following factors:
The intake time has been significantly shortened (140° crank angle (CA) rather than 190 to 200° CA).
Owing to a higher boost pressure on the inlet side, the engine attains optimal cylinder charges despite the shorter intake time.
The intake valve also closes earlier –well before the bottom dead centre is reached. This lowers the medium pressure, allowing a high, efficiency-boosting compression ratio.
In the partial load range, an additional injection upstream from the intake valve yields an efficient mixture formation that is already complemented by the direct injection in the intake manifold and in the combustion chamber.
The Audi Valvelift System (AVS) on the inlet side allows a short intake time at partial load and a longer time at higher loads (full load: 170° CA).
Dr. Stefan Knirsch, Head of Engine Development at Audi, sums up the benefits of the new engine: “Thanks to this rightsizing approach, the new engine enjoys the consumption benefits of a downsizing engine in partial load operation, while at higher loads it has the advantages of a large-displacement engine. The result is optimal efficiency and performance characteristics across the entire engine speed range.”
Beyond the new combustion method, the new engine, which weighs in at a relatively modest 140 kg, avails itself of other efficiency technologies. For example, the coolant flow is controlled so as to greatly shorten the engine warm-up time. The integration of the exhaust manifold into the cylinder head also brings benefits, as does the use of low-friction engine oil (0W-20).
The comprehensive package of high-tech solutions makes the new 2.0 TFSI a real high-efficiency engine that sets a new benchmark in its segment. Audi will be introducing the new generation of engines in the new Audi A4, and then in other model series